Last Updated on by
Are you considering doing your own upgrade for SOLIDWORKS/ PDM? A lot of our clients choose to do so on their own and it’s usually 1 of 2 reasons behind that decision.
- You have no idea Tech Support can assist.
- You believe you have the technical knowledge and experience to undertake this process on your own.
First and foremost, if you’re looking to do a SOLIDWORKS Upgrade, don’t sweat it. Our Engineers are on standby for calls just like this one. We’ll free you up and enable you to carry on with other tasks or projects in your busy day while we take care of the rest. Speaking of rest, rest assured that you’ll be up and running in no time. If you’re looking to do a PDM Upgrade we can still help! We take pride in being able to answer some of those daunting questions that come up.
Now, if you’re fully aware of how we can contribute but are still choosing to do so on your own–that’s great news too! Many of our clients are capable of completing the upgrade process. Throughout the years we’ve still had some FAQs come up. Lucky for you, we’ve addressed many of those and documented them. A clearly defined process would definitely benefit even the experts. Check out our WhitePaper where you can get a step by step walk through on how to go about the upgrade process. It’s our guide here at DesignPoint and we hope you find it just as useful as we do.
It goes unsaid, but if any hiccups or questions still come up please don’t hesitate in giving us a call. You can dial (732) 669-0055 ext 3 to get us on the line. In fact, we welcome your inquiries as it’s an additional opportunity to support and serve you.